Skip to main content
The Practice
Billing and claimsNovember 19, 2026

MIPS Quality Reporting for Therapists: Who Must Report and How Outcome Measures Count

A plain-language guide to the Merit-based Incentive Payment System for PTs, OTs, and SLPs: eligibility, the quality category, Quality ID 182, and a reporting plan.

Callie Editorial 15 min read
The MIPS reporting year
7 steps

Action required

Denial recovery queue

01 · Classify

Eligibility, coding, documentation

02 · Correct

Fix the root record

03 · Respond

Resubmit or appeal on time

Reason → owner → deadline → evidence → outcome

At a glance

What you’ll leave with

  • PTs, OTs, and qualified SLPs are MIPS eligible clinician types, but a clinician must report only when the TIN/NPI exceeds all three parts of the low-volume threshold. Check each NPI on the QPP Participation Status tool every year.
  • Traditional MIPS quality reporting for 2026 means six measures (one outcome or high priority) or a complete specialty set, for the full calendar year, with data for at least 75% of eligible cases.
  • Quality ID 182 turns a standardized functional outcome assessment into a reportable measure: a named tool, a current score within 30 days, and a care plan documented within two days.

Most PTs, OTs, and SLPs in private practice hear about MIPS from a vendor email or a fee schedule summary, and the message is usually vague: you might have to report, there might be a penalty. The Merit-based Incentive Payment System is more specific than that. It applies to named clinician types, it uses a three-part volume test to decide who must report, and its quality category has exact rules for how a measure counts. This guide covers who among therapists is a MIPS eligible clinician, what quality reporting asks for, how functional outcome measures for therapy MIPS enter a submission, and a seven-step process to run the reporting year. It is general professional education, not advice on a specific submission.

The program

What is MIPS, and why does it apply to therapy practices?

MIPS is the Medicare Part B program that scores eligible clinicians from 0 to 100 points on quality, improvement activities, Promoting Interoperability, and cost. The score sets a positive, neutral, or negative adjustment to Physician Fee Schedule payments two years later. Physical therapists, occupational therapists, and qualified speech-language pathologists are on the CMS list of MIPS eligible clinician types, so the program can apply to a therapy practice that bills Part B.

Eligibility is not the same as an obligation to report. CMS evaluates each combination of a Taxpayer Identification Number (TIN) and a National Provider Identifier (NPI). If you reassign billing to two practices, you get two evaluations. ASHA also points out that MIPS reporting happens only in settings where the individual NPI and the CPT codes appear on the claim. A therapist who works only in a hospital or skilled nursing facility does not report MIPS for that work.

Eligibility

Which PTs, OTs, and SLPs must report MIPS?

For 2026, a PT, OT, or qualified SLP must report when the TIN/NPI exceeds all three parts of the low-volume threshold and no exclusion applies. CMS excludes clinicians who first enroll in Medicare on or after January 1, 2026, and Qualifying APM Participants. A clinician who exceeds one or two parts may opt in, which makes the payment adjustment apply. A clinician below the threshold may report voluntarily with no adjustment.

> $90,000

Medicare Part B allowed charges

For covered professional services, per CMS for the 2026 performance year.

> 200

Medicare Part B patients

Counted for the TIN/NPI combination or the TIN.

> 200

Covered professional services

All three must be exceeded for required reporting.

CMS checks the threshold twice for each performance year. The preliminary result comes out in December before the year starts, and the final result comes out in December of the performance year. Your status can change between the two, for example when you join a new practice. To find your status, enter each NPI in the QPP Participation Status tool. Do this every year, and do it again when a clinician joins or leaves.

The quality category

What does MIPS quality reporting actually involve?

In traditional MIPS for 2026, you report six quality measures, and at least one must be an outcome or high priority measure. As an alternative, you report a complete specialty measure set. You collect data for the full calendar year and report performance for at least 75% of the eligible cases for each measure. CMS compares each measure to a benchmark and gives it 1 to 10 points.

CMS publishes a Physical Therapy/Occupational Therapy specialty measure set and a Speech Language Pathology specialty measure set in its Explore Measures tool. If a set has fewer than six measures, you report each measure in the set. Each measure also has a collection type, and each collection type has its own specification. The main ones are Medicare Part B claims, MIPS clinical quality measures (CQMs) submitted through a registry, and electronic CQMs, which need certified EHR technology. Read the specification for the collection type you use, not a summary of it.

Data completeness is where most therapy practices lose points. The 75% rule applies to the whole eligible population for a measure, which the specification defines by age and by the CPT codes on the encounter. If 200 visits qualify, you must report a result for at least 150. A measure that misses data completeness earns zero points, or 3 points for a small practice. CMS also says that reporting only favorable cases is not true, accurate, or complete data and can lead to an audit.

Outcome measures

How do functional outcome measures enter a MIPS submission?

A functional outcome measure enters MIPS through a quality measure that describes it. The most direct one for therapists is Quality ID 182, Functional Outcome Assessment, a high priority process measure. It counts a visit as met when the record names a standardized tool, the score is current within 30 days, and a care plan for the deficits is documented within two days of the assessment.

The 2026 MIPS CQM specification for Quality ID 182 applies to patients aged 18 and older and to visits with qualifying CPT codes, which include the PT and OT evaluation codes and several SLP evaluation codes. You report it at each eligible visit. The specification defines a standardized tool as one that has been normed and validated, and it lists examples such as the Oswestry Disability Index, the Neck Disability Index, the DASH, PROMIS, the EAT-10, and the Berg Balance Test. A pain scale alone, such as a visual analog scale, does not meet the definition. The measure is also eligible for telehealth visits.

Quality ID 182 checks that you assessed function and planned care from the result. It does not check which tool you chose or whether the score improved. Tool choice is a clinical question, and our guide to choosing functional outcome measures covers it: repeat cost, sensitivity to change, and payer readability. Use that guide to pick the tool. Use the measure specification to document it so that the visit counts.

Worked example (fictional)

One outpatient PT visit, documented for Quality ID 182

A fictional solo PT practice reports Quality ID 182 as a MIPS CQM through a registry. The patient is 64 and attends for low back pain. The names and scores are invented to show the documentation pattern.

Evaluation, day 1

The PT administers the Oswestry Disability Index and records the tool name and the score in the evaluation note. The plan of care in the same note lists goals and interventions for the deficits the ODI shows. Result: performance met, with a care plan documented within two days.

Visit 6, day 18

No new ODI is administered. The last assessment is 17 days old, so it is still current under the 30-day definition. The note references the day 1 score and the active plan of care. Result: performance met as a current assessment within 30 days.

Visit 10, day 34

The last ODI is now 33 days old and is no longer current. If the PT does not repeat it, this visit is performance not met, and it still counts in the denominator. The fix is a scheduled repeat before day 30, which is also the repeat a progress report needs.

The centerpiece

What is the MIPS reporting process for a therapy practice?

Run MIPS as a calendar-year process, not as a task in the submission window. Confirm status in December, choose measures and a collection method before January 1, put the measure into the note template, and audit data completeness every quarter. Then complete improvement activities and, if it applies, Promoting Interoperability, and submit when CMS opens the window. The seven steps below follow that order.

  1. 01

    1. Check status for every TIN/NPI

    When CMS releases preliminary eligibility in December, look up each clinician in the QPP Participation Status tool. Record whether each one is required, opt-in eligible, or neither, and whether the practice has a special status such as small practice. Check again when the final result comes out and when staff change.

  2. 02

    2. Decide how to participate

    Choose individual or group reporting. For opt-in eligible clinicians, decide whether to opt in, which makes the adjustment apply, or report voluntarily, which does not. APTA calls this a business decision, and ASHA notes that the cost to participate may exceed the reward. Compare the two before you decide.

  3. 03

    3. Choose a collection type

    Small practices can report quality measures through Medicare Part B claims. Other options are MIPS CQMs through a qualified registry or a QCDR, and eCQMs through certified EHR technology. The collection type decides which specification you follow and what your software must capture, so confirm it before you choose measures.

  4. 04

    4. Choose measures and read the specifications

    Start with the PT/OT or SLP specialty measure set in the CMS Explore Measures tool for the current year. Choose six measures, or the complete set, and confirm that at least one is an outcome or high priority measure. Download each specification for your collection type and note the denominator codes, the age range, and the numerator options.

  5. 05

    5. Put each measure into the note template

    A measure that depends on memory will miss the 75% rule. Add required fields to the evaluation and daily note templates: the tool name, the score, the date, and the care plan link for Quality ID 182. Add a reminder for a repeat before the score goes out of date.

  6. 06

    6. Audit data completeness every quarter

    Count the eligible visits for each measure and the visits with a reported result. If the rate is below 75%, find the cause, such as a template that one clinician does not use, and fix it while the year is still open. Include unfavorable results. CMS treats selective reporting as incomplete data.

  7. 07

    7. Complete the other categories and submit

    Attest to improvement activities. A small practice attests to one. Promoting Interoperability needs certified EHR technology unless a special status or an approved hardship exception reweights it. Submit during the window CMS publishes for the year, then review your feedback and final score.

Special statuses

What changes for a small therapy practice?

CMS gives small practice special status to a TIN with 15 or fewer clinicians. The practice attests to one improvement activity and can report quality through Medicare Part B claims. It gets 6 bonus quality points if it submits at least one quality measure, and 3 points instead of zero for a measure that misses data completeness or the case minimum. It does not have to report Promoting Interoperability.

Scoring

How does the final score become a payment adjustment?

CMS combines the category scores into a final score from 0 to 100 and compares it to the performance threshold. For the 2026 performance year, the threshold is 75 points, and CMS has finalized it at that level through the 2028 performance year. A score above the threshold gives a positive adjustment, a score equal to it is neutral, and a score below it is negative. The adjustment applies to Part B claims two years later.

This guide gives no adjustment percentages, because they change from year to year. Use the figures CMS publishes for the payment year in question, not a number from a past year.

What is next

Will traditional MIPS go away?

CMS says that it will end traditional MIPS through future rulemaking. After that, MIPS Value Pathways (MVPs) become mandatory for clinicians who are not eligible for the APM Performance Pathway. An MVP is a smaller set of measures and activities for one specialty or condition. CMS has not set a date. Check the Explore MVPs tool each year to see whether an MVP fits your discipline.

Sources of truth

Where should you check this year’s MIPS rules?

Check three places. Use the QPP Participation Status tool for eligibility. Use the CMS Explore Measures tool and the measure specification PDFs for the current performance year for measure rules. Use the annual Physician Fee Schedule final rule and its QPP fact sheet for program changes. ASHA and APTA publish MIPS summaries for their members. Treat vendor summaries as a starting point, not as the source.

Field checklist

07 items

Annual MIPS check for a therapy practice

  • Look up every clinician NPI in the QPP Participation Status tool and record the status for each TIN.
  • Record special statuses that change requirements, such as small practice or hospital-based.
  • Decide individual or group reporting and, for opt-in eligible clinicians, opt in or report voluntarily.
  • Download the current-year specification for each measure, for the collection type you use.
  • Confirm that the note templates capture every numerator element, including the tool name and the date.
  • Put a quarterly data completeness audit on the calendar.
  • Read the QPP fact sheet for the next year when CMS publishes the final rule.

Quick answers

Therapy MIPS: FAQ

How do functional outcome measures work for therapy MIPS?

MIPS does not score a functional outcome tool directly. It scores quality measures that describe how you use one. Quality ID 182 counts a visit as met when the note names a standardized tool, the score is current within 30 days, and a care plan for the deficits is documented within two days. Choose the tool for clinical reasons, then document it to the measure specification.

Do physical therapists have to report MIPS?

Only some do. A PT must report when the TIN/NPI exceeds all three parts of the low-volume threshold and no exclusion applies. For 2026, the parts are more than $90,000 in Part B allowed charges, more than 200 Part B patients, and more than 200 covered professional services. Check each NPI in the QPP Participation Status tool.

Can occupational therapists and SLPs report MIPS if they are not required to?

Yes. A clinician who exceeds one or two parts of the low-volume threshold can opt in, and the payment adjustment then applies. A clinician who does not opt in can report voluntarily, which gives feedback from CMS but no adjustment. ASHA notes that the cost to participate may exceed the reward, so compare the two before you opt in.

How many quality measures does a therapy practice report?

In traditional MIPS for 2026, you report six quality measures, including at least one outcome or high priority measure, or a complete specialty measure set. If the set has fewer than six measures, you report each one. You report each measure for the full calendar year and for at least 75% of eligible cases.

Does a small therapy practice have to report Promoting Interoperability?

No. CMS automatically reweights Promoting Interoperability for a practice with small practice special status, which means 15 or fewer clinicians under the TIN. The practice can still submit the data, and CMS then scores it. Practices without a special status need certified EHR technology or an approved hardship exception.

Is MIPS the same as functional limitation reporting?

No. Functional limitation reporting was a claims-based requirement for Medicare Part B therapy services. CMS ended it for dates of service on or after January 1, 2019. MIPS is a separate program with its own eligibility test, measures, and payment adjustment.

Primary sources

Bibliography / 13
  1. 01How is MIPS eligibility determined? (2026 performance year)CMS Quality Payment Program
  2. 02QPP Participation Status lookupCMS Quality Payment Program
  3. 03Participation options overviewCMS Quality Payment Program
  4. 04Special statusesCMS Quality Payment Program
  5. 05Quality: traditional MIPS requirementsCMS Quality Payment Program
  6. 06Promoting Interoperability: traditional MIPS requirementsCMS Quality Payment Program
  7. 07Explore measures and activitiesCMS Quality Payment Program
  8. 08Quality ID #182: Functional Outcome Assessment, 2026 MIPS CQM specificationCMS Quality Payment Program
  9. 09MIPS reporting optionsCMS Quality Payment Program
  10. 10Final score and paymentCMS Quality Payment Program
  11. 11CY 2026 Medicare PFS final rule: QPP fact sheet and policy comparison tableCMS
  12. 12The Medicare Merit-Based Incentive Payment System: a guide for audiologists and SLPsAmerican Speech-Language-Hearing Association
  13. 13Merit-Based Incentive Payment SystemAmerican Physical Therapy Association

Written by Callie Editorial

Published November 19, 2026

Educational content, not legal, billing, or patient-specific clinical advice.